Image result for protect your boats vinyl seats

How to Protect Your Watercraft’s Vinyl Seats

Just like you apply sun block to protect your skin– you also should think about protecting your vinyl boat seats from the effects of sun, weather and time. Within this all-hands-on-deck blog, we are going to walk you through a few of the best ways to protect your boat’s vinyl upholstery to prevent future needs for vinyl seat repair work and to keep it looking as good as new!

Step One: Clean Your Boat Upholstery. To clean vinyl surfaces in marine upholstery, make use of a good-quality boat vinyl cleaner– like Gold Eagle’s 303 ® Multi-Surface Cleaner. This particular cleanser cleans and brightens all water-safe surfaces, without leaving any type of residue or streaking behind. It will definitely keep you from needing to carry 15 cleaning products with you for the job. You need a soft brush, a few clean cloths, a toothbrush for crevices, and your high quality vinyl cleaner.To clean boat upholstery, adhere to the instructions on the product you choose. The basic way to clean vinyl is to:

Apply a light coating of vinyl seat cleanser right onto the seat and let it sit for about a minute. Meanwhile, arrange your cleaning supplies.

( SUGGESTION: If utilizing an old towel, cut it into quarter sections, as the smaller pieces make it easier to get into crevices and between cushions.).

Once the cleanser has sat a little bit on the surface, get the soft brush and work over the vinyl in circular strokes, using very little pressure. Vinyl is tough, but the 303 ® Multi-Surface Cleaner does the work for you.

Go over the entire surface of the seat in segments. Use the towel to remove the dust and grime that the cleanser loosens. When it comes to the piping and down into creases, use the toothbrush, just as you did the soft brush. Spray the cleanser straight onto the brush. Then follow with a clean area of towel.

( SUGGESTION: Always utilize a clean portion of the towel to ensure that you are not simply re-applying the grime to the seat.)

Step Two: Protect Your Vinyl Boat Upholstery303 Aerospace Protectant can help you protect most types of boat vinyl, including vinyl seats & more!

Right after your vinyl boat seats have actually been completely cleaned up, safeguard them with a product like 303 Aerospace Protectant. Safe and effective for rubber, vinyl and plastic surface areas, this specific product provides superior UV protection to prevent fading and cracking of the vinyl, repels blemishes, dust and various other stains, and leaves behind a dry, matte finish with no oily feel.

In order to protect your boat seats, abide by the directions on your product. When it comes to protectants such as 303 Aerospace Protectant, the basic standards are:.

Spray the protectant on the cleaned vinyl surface area, and wipe the spot completely dry. For better bonding as well as durability, buff a couple of times with a dry cloth. Repeat this particular procedure, along with cleansing, every three to five weeks so as to make the most of UV protection.

Make sure to comply with this particular cleaning and safeguarding protocol every time you use your boat and, whenever your boat is resting, at least once a week. Doing this will help ensure that your boat’s vinyl surfaces stay tidy, protected, and looking beautiful for years to come!

What to Do When Your Boat Seats Are Harmed.

Vinyl, while strong, sometimes is not strong enough. Either you’ve purchased a boat that was not well cared for, or somebody sat in the seats with a sharp tool in his or her pocket– and now your boat’s seats are damaged. Holes, splits, cracks, and tears happen. To help keep water and salt out of the inside of your upholstery, switch out damaged vinyl.

We offer a complete line of Raritan Marine Products to design your vessel’s marine sanitation system.

via Photo