Vented Loops

Tru-Design Vented Loops are the superior composite siphon break solutions for marine applications. Vented Loops prevent water siphoning from underwater skin fittings back into a vessel and thereby guard against accidental flooding and sinking.

Vented loops are used predominantly in toilet to overboard applications, toilet inlet applications and holding tank to overboard applications. They can also be used in genset or small engine inlet cooling water systems.

The simple one way breather valve at the top of the vented loop allows air to enter the line when not in use, thereby preventing siphoning – and yet seals when water or waste passes through the loop. The duckbill one way valve is designed to seal even when particles are present in the fluid.

Tru-Design Vented Loops are the superior composite siphon break solutions for marine applications. Vented Loops prevent water siphoning from underwater skin fittings back into a vessel and thereby guard against accidental flooding and sinking. A Solenoid controlled Vented Loop allows the vent to be switched to fully closed. This eliminates air entering the system as occurs with a standard vented loop. The solenoid used is normally open, requiring power only to close the valve.

Vented Loops are molded from a glass reinforced nylon composite. High strength, high-modulus glass fibers impregnated into the nylon provides dramatic strength, stiffness, toughness, and dimensional stability to our loops.

There are no products
Home Privacy Policy Terms Of Use VL3/8-VENTED LOOP 3/8" FOR SALT FEED TANK Anti Spam Policy Contact Us Affiliate Disclosure VL3/8-VENTED LOOP 3/8" FOR SALT FEED TANK DMCA Earnings Disclaimer