Fuse Relay

Tools you will need:
Flat blade screw driver (med)
5/16″, 7/16″, 1/2″ socket or equivalent

1.) There are 2 branch circuit breakers mounted in fuse holders located at the bottom (closest to floor) of the unit.

Also 1 continuous duty solenoid.

Bottom view

2.) Should the replacement of the AM060 be necessary, note the position of the connecting wires.

Remove the two 1/4″ screws from the mounting bracket.

Remove the two 1/2″ nuts and other wire fasteners.

Reassemble in reverse order.

Mounting bracket removed from motor and inverted