Electric Marine Toilet Control Parts
All Raritan electric toilets can be configured with the choice of various controls to suit your installations and needs. These choices can be selected within the specific toilet configurationssection during the ordering process.
The the different electric toilet control Raritan offers are:
- Smart Toilet Control (STC)
- Multifunction Momentary Control
- FlushSense® Control
- Push Button Control
- Bluetooth Toilet Control
Smart Toilet Control (STC)
The Smart Toilet Control (STC) is a controller for flushing the toilet to optimize water use without compromising the quality of the flush.
The STC is designed to automatically start a flushing cycle if NORMAL FLUSH oe WATER SAVER buttons are pressed. WATER ONLY button brings inlet water to the bowl when pressed and EMPTY ONLY button evacuates the bowl. Both WATER ONLY and EMPTY buttons have a tim limit of eight seconds. Flush timing of initial fill, discharge and final fill are fully programmable from the control panel. If wired, the panel will also show holding tank fullness level status. When holding tank FULL LED is lit, normal and water saver buttons are disabled. WATER ONLY and EMPTY buttons will continue to function. the STC is Reverse Polarity protected. In the case of reverse polarity, motors and solenoid will activate as soon as power is connected. After reverse polarity is corrected (within 10 minutes) the STC unit will work as normal.
Multifunction Momentary Control
Multifunction Momentary Control includes a Switch panel, controller and cable.
Functions available are:
- “FILL” to add water to the bowl
- “Empty” to evacuate the bowl
- “Flush” to bring water in while bowl is evacuating
Multifunction Momentary Control can also be configured with SEA/FRESH switch option.
Multifunction control can be used with all Raritan Electric Toilets EXCEPT integral SeaEra model.
Installation and Operation Manual
Raritan’s FlushSense® Control is designed to automatically activate a flush cycle without touching the control. Simply waving your hand within 2” of the sensor will begin a sequential flush cycle that offers guests a simple and sanitary solution to flushing the toilet.
Consists of a controller (STC), panel switch and 7’ of cable, designed to automatically start a flushing cycle if a hand is within 2” from switch. Flush timing of initial fill, discharge and final fill are factory programmed. Optional multifunction panel is required to re-program.
FlushSense® can be used with all electric toilet except integral SeaEra
Push Button Control
Bluetooth Toilet Control
Bluetooth Toilet Controlcomes with remote panel that installs wirelessly up to 50 feet away from the toilet.
Panel has buttons for four functions:
- Normal flush
- Water saver flush
- Water only
- and empty only
The Panel also indicateds the holding tank full status if holding tank sensor is installed with control. Our panel layout is easy to understand and minimizes guest confusion over which button to push. The panel operates using three AAA batteries which has an expected life span of 2 years. Control box is installed close to toilet and is connected to battery and toilet. Boaters can download a Smartphone app to their mobile device to manage their toilet system.
Once the controller is paired with your phone, all settings for timing can be customized for specific installation. Users can customize their flush settings by choosing between a continuous or sequenced flush and can even optimize their water usage by adjusting multiple flush time settings. After settings, toilet flush can be tested by operating a virtual panel on phone to confirm desired results. An advanced diagnostics feature displays all data on phone when paired and allows to sends operating data directly to Raritan through e-mail to aid in troubleshooting. Operating data includes voltage input and current levels for the last 250 cycles.
App is available from the Google Play and Apple App Stores
This control can be used with all electric toilet except integral SeaEra model.